The installation height of the showerhead can be divided into two types according to the type of showerhead
2025-09-09
The open installation lifting rod showerhead is generally defined by the water outlet surface of the showerhead, and its distance is preferably 2 meters.
It should be noted that these data are only average data, and adjustments should be made based on the user's height when installing the showerhead.
The concealed water pipe of the exposed shower switch should be left hot and right cold, with a center spacing of 150mm. The concealed water outlet on the wall should be level with the tile surface, and the internal concealed water pipe should be perpendicular to the wall. After the installation of the showerhead, it should form a 90 degree angle with the wall.
In addition, adjusting the water pressure of the showerhead is also crucial: generally, water pressure within 1.5 kilograms is most suitable for showerhead use. If the water pressure is too high, it can cause the showerhead to burst, and if the water pressure is too low, the showerhead cannot function properly.
Related News
Basic introduction of floor drain
A floor drain is a drainage device that connects the ground to the drainage pipeline system.
2025-09-09
Common materials for floor drains
Mainly cast iron PVC、 Materials such as zinc alloy, ceramic, cast aluminum, stainless steel, brass, copper alloy, etc.
2025-09-09
Types and characteristics of drain devices
Control the opening and closing of the drain by pressing, with a simple appearance but prone to dirt adhesion, requiring regular cleaning.
2025-09-09
Installation steps of drain system
Disassemble the fixed parts and flanges, and fasten them tightly to the bottom of the basin.
2025-09-09
Faucets installed in bathrooms and toilets for use
Bathroom faucets are faucets installed in bathrooms and toilets, mainly used to control the opening and closing of water flow and regulate water temperature.
2025-09-09